Concrete is only as strong as its compactionFreshly poured concrete carries a surprising volume of trapped air. Left in place, those voids become honeycombing:…
Freshly poured concrete carries a surprising volume of trapped air. Left in place, those voids become honeycombing: rough, pitted patches where the aggregate shows through and the cover over the reinforcement is thin or missing altogether. The result is a member that is weaker than the mix design says it should be, and steel that will start corroding years earlier than it should.
A poker vibrator solves this by fluidising the mix for a few seconds so the air rises out and the concrete flows tightly around the reinforcement and into the corners of the formwork. It is the difference between a column that strips clean and one that needs patching before anyone will accept it.
The 6-metre flexible drive shaft is what makes this practical on real pours. A column cage or a heavily reinforced beam leaves narrow gaps between bars, and the poker has to go down into them, not just touch the surface. Because the motor unit stays on the deck while only the 35mm poker goes into the concrete, one operator can work a whole section without moving equipment between every insertion.
The 35mm poker diameter suits the majority of building work in Kenya: suspended slabs, ground beams, columns, strip and pad foundations, retaining walls and ring beams. It is small enough to fit between typical bar spacing and large enough to have real influence through the depth of a normal pour.
| Motor power | 1500W |
| Vibration frequency | 12,000 VPM |
| Poker diameter | 35mm |
| Hose length | 6m |
| Power source | Electric, 240V |
| Cord length | 5m |
| Motor unit dimensions | 350 × 250 × 300mm |
| Weight | 14kg |
| Certification | CE certified |
| Warranty | 1 year |
Insert the poker vertically and let it sink under its own weight, then hold it in place for roughly 10 to 15 seconds until the surface stops throwing large bubbles and a thin film of paste appears. Withdraw it slowly, over about three seconds, so the concrete closes behind it instead of leaving a void. Space your insertion points around 400 to 500mm apart so the vibrated zones overlap, and push the poker about 100mm into the layer below when pouring in lifts, to knit the two together.
Two things to avoid. Do not over-vibrate: holding the poker in one spot too long drives the heavy aggregate down and brings water and fine paste to the top, which weakens the surface. And do not use the poker to move concrete sideways across the formwork, since that segregates the mix. Shovel it into position first, then vibrate.
Never run the poker dry for extended periods, as the bearings depend on being in concrete to shed heat. Wash the poker and hose down with water immediately after the pour, before the concrete sets on them, and hang the hose in loose coils rather than tight bends or on the ground. Check the flexible shaft coupling regularly, since it takes the most wear. On a Kenyan site where pours are seasonal, a rinsed and hung machine will outlast one that gets thrown in a store caked in dry concrete.
In stock in Nairobi with a 1-year warranty. If you run multiple pours or need spare pokers and hoses, we can quote on those separately. Message us on WhatsApp for pricing, availability or site delivery.
| Motor Power | 1500W |
| Vibration Frequency | 12,000 VPM |
| Poker Diameter | 35mm |
| Hose Length | 6m |
| Power Source | Electric |
| Cord Length | 5m |
| Dimensions | 350 x 250 x 300mm (motor unit) |
| Weight | 14kg |
| Certification | CE certified |
| Warranty | 1 year |
| Ideal For | Slab, column and foundation pours |
| Category | Construction Equipment |
| Rating | |
| Availability | In Stock (8 available) |
No reviews yet. Bought this product? Be the first to share your experience.
Bought this product from Nepron? Log in or create an account with the email you used when ordering, and you can leave a review.