Built for the work a small grinder can't finishThe 9-inch angle grinder is the tool you reach for when a 4-inch machine stops being practical. The 230mm…
The 9-inch angle grinder is the tool you reach for when a 4-inch machine stops being practical. The 230mm disc gives you the depth of cut to go through rebar, angle iron, steel plate, concrete blocks and paving slabs in a single pass instead of cutting from both sides. On a fabrication bench or a live construction site, that difference shows up in hours saved every week.
The 2200W motor is the reason it holds up. Cutting through a 16mm bar or a run of masonry loads the disc heavily, and an underpowered grinder will bog down, overheat and eventually burn out its armature. At 2200W with a 6,500 RPM no-load speed, this machine keeps the disc turning at working speed through the cut, which gives you cleaner edges and longer disc life.
This is a trade-grade tool, not a DIY model dressed up as one. It uses a heavier bearing set and a more robust motor winding than the light grinders sold for occasional home use, and the gear head is built to take the side load that comes with a large disc. If the machine is going to be picked up every morning and used all day on site, that construction is what determines whether it lasts a season or several years.
The M14 spindle is the standard thread size, so discs, backing pads and wire cups are available from any hardware shop in Kenya without hunting for a specialist supplier. The 3-metre cord gives you reasonable working radius from a socket or generator before you need an extension.
A 9-inch grinder carries real energy at the rim and demands respect. Always fit the guard, use both hands, and check that the disc you're mounting is rated at or above 6,500 RPM. Never fit a smaller disc by removing the guard, and never fit a wood-cutting blade. Full face shield, gloves, and ear protection are not optional on a machine this size. Let the disc reach full speed before it touches the work, and let it stop on its own rather than pressing it down to slow it.
| Disc Size | 9-inch (230mm) |
| Power Rating | 2200W |
| No-Load Speed | 6,500 RPM |
| Power Source | Electric |
| Spindle Thread | M14 |
| Cord Length | 3m |
| Dimensions | 480 x 110 x 130mm |
| Weight | 5.2kg |
| Certification | CE certified |
| Warranty | 1 year |
| Ideal For | Metal cutting, grinding, surface preparation |
| Category | Construction Equipment |
| Rating | |
| Availability | In Stock (15 available) |
No reviews yet. Bought this product? Be the first to share your experience.
Bought this product from Nepron? Log in or create an account with the email you used when ordering, and you can leave a review.